Designing a system control for a peanut grinder based on an electric motor

Authors

  • Rifaldi Rifaldi Program Studi Teknik Elektro, Fakultas Teknologi Industri & Informatika, Universitas Muhammadiyah Prof. Dr. HAMKA, Jakarta Timur 12830 Indonesia
  • Kun Fayakun Program Studi Teknik Elektro, Fakultas Teknologi Industri & Informatika, Universitas Muhammadiyah Prof. Dr. HAMKA, Jakarta Timur 12830 Indonesia
  • Rosalina Rosalina Program Studi Teknik Elektro, Fakultas Teknologi Industri & Informatika, Universitas Muhammadiyah Prof. Dr. HAMKA, Jakarta Timur 12830 Indonesia
  • Emilia Roza Program Studi Teknik Elektro, Fakultas Teknologi Industri & Informatika, Universitas Muhammadiyah Prof. Dr. HAMKA, Jakarta Timur 12830 Indonesia
  • Harry Ramza Universitas Muhammadiyah Prof. Dr. HAMKA

DOI:

https://doi.org/10.11594/timeinphys.2023.v1i2p65-74

Keywords:

Peanut Grinder, Production Efficiency, Automation, Peanut Ingredients

Abstract

This research aims to design a control system for a Peanut Grinder based on a 135 Watt AC Motor, intended to assist small and medium-sized food business entrepreneurs who utilize peanut ingredients. The purpose of this device is to enhance production efficiency in the preparation of peanut-based condiments, replacing the manual and time-consuming process with an automated system capable of sorting peanuts into fine and coarse textures as desired. By utilizing a 135 Watt AC Motor obtained from a washing machine as the main driving component, the design aims to reduce costs by reusing existing components. The control system will encompass mechanisms for grinding peanuts efficiently, ensuring user safety, and regulating motor speed and grinding duration. This research emphasizes environmental friendliness by repurposing unused components. Overall, the proposed Peanut Grinder aims to benefit UMKM entrepreneurs by streamlining production processes and enhancing productivity in the peanut-based condiment preparation.

References

Abarca, R. M. (2021). Sistem Mikro Kontroler. Nuevos Sistemas de Comunicación e Información, 2013–2015.W.-K. Chen, Linear Networks and Systems (Book style). Belmont, CA: Wadsworth, 1993, pp. 123–135.

Choerul, R., Ramadhani, W., Fauziyah, L., & Kiswari, L. (2021). Pengaruh Penggunaan Gearbox pada Mesin Peningkat Produktivitas Sale Pisang dengan Metode Translation Pressed Screw. Journal of Mechanical Engineering, 5(2), 55–59.B. Smith, “An approach to graphs of linear forms (Unpublished work style),” unpublished.

Hutagalung, A. (1967). Pengertian Sensor. Angewandte Chemie International Edition, 6(11), 951–952., 5–24.

Jamaaluddin, Robandi, I., Anshory, I., Mahfudz, & Rahim, R. (2020). Application of interval type-2 fuzzy inference system and big bang big crunch algorithm in short term load forecasting new year holiday. Journal of Advanced Research in Dynamical and Control Systems, 12(2), 216–226. https://doi.org/10.5373/JARDCS/V12I2/S202010024.

Mahmudi, H. (2021). Analisa Perhitungan Pulley dan V-Belt Pada Sistem Transmisi Mesin Pencacah. Jurnal Mesin Nusantara, 4(1), 40–46. https://doi.org/10.29407/jmn.v4i1.16201.

Muflihana, A., Arief, D. S., & Nugraha, A. S. (2019). Rancang Bangun Timbangan Digital Dengan Keluaran Berat Berbasis Arduino Uno Pada Automatic Machine Measurement Mass and Dimension. Jurnal FTEKNIK, 6(1), 1–7.

Muttaqin, I. R., & Santoso, D. B. (2021). Prototype Pagar Otomatis Berbasis Arduino Uno Dengan Sensor Ultrasonic Hc-SR04. JE-Unisla, 6(2), 41. https://doi.org/10.30736/je-unisla.v6i2.695.

Natsir, M., Rendra, D. B., & Anggara, A. D. Y. (2019). Implementasi IOT Untuk Sistem Kendali AC Otomatis Pada Ruang Kelas di Universitas Serang Raya. Jurnal PROSISKO (Pengembangan.

Saptono, H., Pramono, G. E., & Khindi, H. Al. (2018). Analisa Daya Dan Kontrol Kecepatan Motor Pada Alat Bantu Las Rotary Positioner Table. AME (Aplikasi Mekanika Dan Energi): Jurnal Ilmiah Teknik Mesin, 4(1), 23. https://doi.org/10.32832/ame.v4i1.988.

W. D. Doyle, “Magnetization reversal in films with biaxial anisotropy,” in 1987 Proc. INTERMAG Conf., pp. 2.2-1–2.2-6.

G. W. Juette and L. E. Zeffanella, “Radio noise currents n short sections on bundle conductors (Presented Conference Paper style),” presented at the IEEE Summer power Meeting, Dallas, TX, Jun. 22–27, 1990, Paper 90 SM 690-0 PWRS.

J. G. Kreifeldt, “An analysis of surface-detected EMG as an amplitude-modulated noise,” presented at the 1989 Int. Conf. Medicine and Biological Engineering, Chicago, IL.

J. Williams, “Narrow-band analyzer (Thesis or Dissertation style),” Ph.D. dissertation, Dept. Elect. Eng., Harvard Univ., Cambridge, MA, 1993.

N. Kawasaki, “Parametric study of thermal and chemical nonequilibrium nozzle flow,” M.S. thesis, Dept. Electron. Eng., Osaka Univ., Osaka, Japan, 1993.

J. P. Wilkinson, “Nonlinear resonant circuit devices (Patent style),” U.S. Patent 3 624 12, July 16, 1990.

Downloads

Published

2023-08-10

How to Cite

Rifaldi, R., Kun Fayakun, Rosalina, R., Emilia Roza, & Ramza, H. (2023). Designing a system control for a peanut grinder based on an electric motor. TIME in Physics, 1(2), 65–74. https://doi.org/10.11594/timeinphys.2023.v1i2p65-74

Issue

Vol. 1 No. 2 (2023): August

Section

Articles

License

Copyright (c) 2023 Rifaldi Rifaldi, Kun Fayakun, Rosalina Rosalina, Emilia Roza, Harry Ramza

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with TIME in Physics (Journal for Theoretical, Instrumentation, Material-Molecular, and Education Physics) agree to the following terms: Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

This work is licensed under a Creative Commons Attribution 4.0 International License.